ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLER CONDENSER ASSEMBLY (a) If the cooler condenser assembly fins are dirty, clean them with water and dry them with compressed air. NOTICE: Do not damage the cooler condenser assembly fins. (b) If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers. 2. INSPECT FOR REFRIGERANT LEAK (a) Using a halogen leak detector, check the pipe joints for refrigerant leaks. (b) If a refrigerant leak is detected in a joint, check the torque of the bolt of the joint. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be dis ...