DISASSEMBLY PROCEDURE 1. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Click here 2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
(b) Disengage the 2 claws to remove the No. 1 side defroster nozzle duct. 3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
(b) Disengage the 2 claws to remove the No. 2 side defroster nozzle duct. 4. REMOVE DEFROSTER NOZZLE ASSEMBLY
(b) Disengage the 4 guides to remove the defroster nozzle assembly. 5. REMOVE METER MIRROR SUB-ASSEMBLY (w/ Headup Display) Click here 6. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
7. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY
8. REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY Click here 9. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET Click here 10. REMOVE NO. 1 METER BRACKET SUB-ASSEMBLY
11. REMOVE NO. 2 METER BRACKET SUB-ASSEMBLY (w/ Headup Display)
12. REMOVE NO. 1 INSTRUMENT PANEL PIN (a) Remove the 4 screws <C> and 4 No. 1 instrument panel pins. 13. REMOVE INSTRUMENT PANEL CUSHION (a) Remove the instrument panel cushion. 14. REMOVE NO. 1 SIDE DEFROSTER NOZZLE
15. REMOVE NO. 2 SIDE DEFROSTER NOZZLE
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Battery or Open (P032515)
DESCRIPTION Refer to DTC P032511. Click here HINT: When DTC P032515 is stored, the ECM enters fail-safe mode. During fail-safe mode, the ignition timing is delayed to its maximum retardation. Fail-safe mode continues until the power switch is turned off. DTC No. Detection Item DTC Detection Conditio ...