REASSEMBLY PROCEDURE 1. INSTALL NO. 2 SIDE DEFROSTER NOZZLE
2. INSTALL NO. 1 SIDE DEFROSTER NOZZLE
3. INSTALL INSTRUMENT PANEL CUSHION (a) Clean the instrument panel safety pad sub-assembly surface. (1) Remove any remaining double-sided tape from the instrument panel safety pad sub-assembly. (2) Wipe off any tape adhesive residue with cleaner. (b) Remove the release paper from a new instrument panel cushion. HINT: After removing the release paper, keep the exposed adhesive free from foreign matter. (c) Install the instrument panel cushion as shown in the illustration. 
4. INSTALL NO. 1 INSTRUMENT PANEL PIN (a) Install the 4 No. 1 instrument panel pins with the 4 screws <C>.  5. INSTALL NO. 2 METER BRACKET SUB-ASSEMBLY (w/ Headup Display)
6. INSTALL NO. 1 METER BRACKET SUB-ASSEMBLY
7. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET Click here
8. INSTALL NO. 4 ANTENNA CORD SUB-ASSEMBLY Click here 9. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY
10. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
11. INSTALL METER MIRROR SUB-ASSEMBLY (w/ Headup Display) Click here
12. INSTALL DEFROSTER NOZZLE ASSEMBLY
(b) Install the defroster nozzle assembly with the 3 screws <C>. 13. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
(b) Install the No. 2 side defroster nozzle duct with the 2 screws <C>. 14. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
(b) Install the No. 1 side defroster nozzle duct with the screw <C>. 15. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Luggage Compartment Door Opener System(for Hv Model): Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...
