Toyota Avalon Service & Repair Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL NO. 1 ROOF WIRE

(a) for Normal Roof:

  1. Apply butyl tape as shown in the illustration.

    *a

    Marking

    -

    -

    Butyl Tape

    -

    -

    NOTICE:

    Securely attach the butyl tape.

(b) for Moon Roof:

  1. Apply butyl tape as shown in the illustration.

    *A

    w/o Active Noise Control System

    *B

    w/ Active Noise Control System

    *a

    Marking

    -

    -

    Butyl Tape

    -

    -

    NOTICE:

    Securely attach the butyl tape.

(c) Align the marking tape (A) on the No. 1 roof wire with the vehicle front side tab of the roof headlining.

*A

for Normal Roof

*B

for Moon Roof

*C

w/ Humidity Sensor

-

-

*a

Marking Tape (A)

*b

Marking Tape (B)

*c

Notch

*d

Marking

Adjustment Area

-

-

(d) Engage each clamp.

(e) Engage the No. 1 roof wire to each notch of the roof headlining as shown in the illustration.

(f) Align the marking tape (B) on the No. 1 roof wire with the markings on the roof headlining.

(g) Attach the No. 1 roof wire with the butyl tape.

NOTICE:

  • Securely attach the No. 1 roof wire.
  • If any of the No. 1 roof wire is left loose, it will cause an abnormal noise.
  • Make sure to attach the No. 1 roof wire without leaving any of it loose.

HINT:

Secure the extra length of the No. 1 roof wire in the adjustment area.

(h) Install the No. 1 roof wire to the roof headlining with adhesive tape.

*A

for Normal Roof

*B

for Moon Roof

*C

w/ Active Noise Control System

-

-

*1

No. 1 Roof Wire

-

-

*a

Correct

*b

Incorrect

*c

Marking

*d

10 mm (0.394 in.) or more

Adhesive Tape

-

-

Adhesive Tape Size

Area

Dimension

Area

Dimension

A

20 mm (0.787 in.)

B

80 mm (3.15 in.) or more

NOTICE:

  • Apply the tape securely in place.
  • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

2. INSTALL ACTIVE NOISE CONTROL MICROPHONE WITH COVER (w/ Active Noise Control System)

Click here

3. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY

Click here

4. INSTALL NO. 2 ROOF SILENCER (for Normal Roof)

(a) Align the 2 No. 2 roof silencers with the markings on the roof headlining and install them using hot-melt glue as shown in the illustration.

*a

Hot-melt Glue

*b

Marking

    Installation

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Adaptive Variable Suspension System: Front Wheels Speed Sensor Signal Malfunction (C1783)
    DESCRIPTION The speed sensors monitor the speed of the wheels and send an appropriate speed signal to the absorber control ECU through the skid control ECU (brake actuator assembly). If a malfunction occurs in either a front speed sensor or rear speed sensor, DTC C1783 is stored. DTC No. Detection I ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0159