Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Apply auxiliary battery voltage to the No. 5 interior illumination light sub-assembly and check that the light illuminates. OK:
If the result is not as specified, replace the No. 5 interior illumination light sub-assembly. Installation INSTALLATION PROCEDURE 1. INSTALL NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) Turn the No. 5 interior illumination light sub-assembly as shown in the illustration to install it.
(b) Connect the connector. 2. INSTALL NO. 3 CONSOLE BOX DUCT Click here 3. INSTALL NO. 2 BOX SIDE PANEL Click here 4. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Click here 5. INSTALL CONSOLE ASSEMBLY Click here Removal REMOVAL PROCEDURE 1. REMOVE CONSOLE ASSEMBLY Click here 2. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Click here 3. REMOVE NO. 2 BOX SIDE PANEL Click here 4. REMOVE NO. 3 CONSOLE BOX DUCT Click here 5. REMOVE NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(b) Turn the No. 5 interior illumination light sub-assembly as shown in the illustration to remove it.
|
Toyota Avalon Service & Repair Manual > Occupant Classification System(for Gasoline Model): System Description
SYSTEM DESCRIPTION GENERAL (a) The occupant detection ECU estimates the weight of an occupant based on signals received from the 2 occupant classification sensors. The occupant detection ECU determines whether the front passenger seat is occupied and classifies the occupant based on the estimated we ...