Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Apply auxiliary battery voltage to the No. 6 interior illumination light sub-assembly and check that the light illuminates. OK:
If the result is not as specified, replace the No. 6 interior illumination light sub-assembly. Installation INSTALLATION PROCEDURE 1. INSTALL NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) for RH Side: (1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to install it.
(b) for LH Side: (1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to install it.
2. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Click here Removal REMOVAL PROCEDURE 1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Click here 2. REMOVE NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) for LH Side: (1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to remove it.
(b) for RH Side: (1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to remove it.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Safety Connect System(for Hv Model): Parts Location
PARTS LOCATION ILLUSTRATION *1 RADIO AND DISPLAY RECEIVER ASSEMBLY *2 DCM (TELEMATICS TRANSCEIVER) - BUB (BACK-UP BATTERY) *3 INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY - ECU-IG2 NO. 3 FUSE - ECU-ACC FUSE - DCM FUSE *4 DLC3 *5 AIRBAG ECU ASSEMBLY - - ILLUSTRATION *1 FRONT NO. 1 SPEAKER ASSEMBLY RH *2 ...