DESCRIPTION The main body ECU (multiplex network body ECU) detects the condition of the mood switch on the roof console box sub-assembly using this circuit. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration. Click here PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Data List. (e) Read the Data List according to the display on the Techstream. Body Electrical > Main Body > Data List
OK: Normal conditions listed above are displayed.
(a) Remove the mood switch (roof console box sub-assembly). Click here (b) Inspect the mood switch (roof console box sub-assembly). Click here
(a) Disconnect the G33 main body ECU (multiplex network body ECU) connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Avalon Service & Repair Manual > Steering Column Assembly(for Manual Tilt And Manual Telescopic Steering Column): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STEERING LOCK ACTUATOR ASSEMBLY NOTICE: When replacing the steering lock actuator assembly, perform registration. (a) Secure the steering column assembly in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Temporarily install the steering lock ...