INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY (a) Connect the connector. (b) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw. Torque: 6.3 N·m {64 kgf·cm, 56 in·lbf} 2. INSTALL REAR SIDE SEATBACK ASSEMBLY Click here 3. INSTALL REAR SEAT CUSHION LOCK HOOK Click here 4. INSTALL REAR SEAT CUSHION ASSEMBLY Click here 5. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here 6. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (w/ Seat Heater System) Click here 7. INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Seat Heater System) Click here 8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL for A25A-FXS: Click here for 2GR-FKS: Click here 9. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model) Click here 10. PERFORM DIAGNOSTIC SYSTEM CHECK for Gasoline Model: Click here for HV Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Panoramic View Monitor System(for Gasoline Model): Back Camera Power Supply Failure (C1621)
DESCRIPTION This DTC is stored if the television camera assembly judges as a result of its self check that the signals or signal lines between the television camera assembly and parking assist ECU are not normal. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from C1621 Back ...