Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT SPOT LIGHT ASSEMBLY
(a) Apply auxiliary battery voltage to the spot light assembly and check that the lights illuminate. OK:
If the result is not as specified, replace the spot light assembly. Installation INSTALLATION PROCEDURE 1. INSTALL SPOT LIGHT ASSEMBLY (a) Connect the connector. (b) Engage the 8 claws to install the spot light assembly.
Removal REMOVAL PROCEDURE 1. REMOVE SPOT LIGHT ASSEMBLY (a) Using a moulding remover, disengage the 8 claws.
(b) Disconnect the connector to remove the spot light assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Fuel Lid Opener System(for Hv Model): Data List / Active Test
DATA LIST / ACTIVE TEST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of switches, ...