REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headup display (meter mirror sub-assembly) removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
CAUTION: Be sure to read Precaution thoroughly before servicing. for Gasoline Model: Click here for HV Model: Click here PROCEDURE 1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Click here 2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT Click here 3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT Click here 4. REMOVE DEFROSTER NOZZLE ASSEMBLY Click here 5. REMOVE METER MIRROR SUB-ASSEMBLY
6. REMOVE METER MIRROR WIRE
(b) Disengage the claw and clamp to remove the meter mirror wire. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Steering Angle Sensor: Components
COMPONENTS ILLUSTRATION *A w/o Heated Steering Wheel System *B w/ Heated Steering Wheel System *1 STEERING SENSOR *2 SPIRAL CABLE SUB-ASSEMBLY ...