DESCRIPTION A hybrid system indicator has been included on this vehicle. In this circuit, the combination meter assembly receives the hybrid system indicator signal from the hybrid vehicle control ECU via CAN communication. The combination meter assembly controls the operation of the hybrid system indicator according to the hybrid system indicator signal received from the hybrid vehicle control ECU via CAN communication. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Check if CAN communication DTCs are output. Click here
(a) Check if hybrid control system DTCs are output. Click here Powertrain > Hybrid Control > Trouble Codes
(a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Combination Meter / Data List. (e) Read the Data List according to the display on the Techstream. Body Electrical > Combination Meter > Data List
OK: Hybrid system indicator value displayed on the Techstream is almost the same as the hybrid system indicator indication.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Wiper Motor: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (a) for RH Side: (1) Operate the windshield wiper motor assembly. (2) Stop the windshield wiper motor assembly operation. (3) Check the automatic stop (park) position. HINT: After the front wiper motor is stopped, check the a ...