DESCRIPTION In this circuit, the combination meter assembly receives engine rpm data signal from the hybrid vehicle control ECU via CAN communication. The combination meter assembly displays the engine speed calculated based on the data received from the hybrid vehicle control ECU. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Check if CAN communication DTCs are output. Click here
(a) Check if hybrid control system DTCs are output. Powertrain > Hybrid Control > Trouble Codes
(a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Hybrid Control / Data List. (e) Read the Data List according to the display on the Techstream. Powertrain > Hybrid Control > Data List
OK: Engine speed displayed on the Techstream is almost the same as the tachometer indication.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Seat Side Airbag Assembly: Disposal
DISPOSAL CAUTION / NOTICE / HINT CAUTION: Before performing pre-disposal deployment of any SRS part, review and closely follow all applicable environmental and hazardous material regulations. Pre-disposal deployment may be considered hazardous material treatment. PROCEDURE 1. PRECAUTION CAUTION: An ...