DESCRIPTION When the pre-collision system is operating, the driving support ECU assembly sends brake control signals to the skid control ECU (brake actuator assembly). If the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU (brake actuator assembly) via CAN communication, DTC C1A50 will be stored.
CAUTION / NOTICE / HINT NOTICE: The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting. Click here
PROCEDURE
HINT: If DTC C1A50 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Audio And Visual System(for Gasoline Model): Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...
