Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Brake Control Signal Mismatch (C1A64)

DESCRIPTION

The skid control ECU (brake actuator assembly) sends signals to the driving support ECU assembly according to the brake control status. If the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU (brake actuator assembly), it will store DTC C1A64.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A64

Brake Control Signal Mismatch

While the engine switch is on (IG), the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU (brake actuator assembly) continuously for 0.5 seconds or more.

Electronically controlled brake system

CAUTION / NOTICE / HINT

NOTICE:

The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.

Click here

PROCEDURE

1.

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

HINT:

If DTC C1A64 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.

Click here

NEXT

END

    Other System Malfunction (C1A63)

    Front Camera Module Circuit (C1AA0)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Engine Coolant Temperature Sensor 1 Circuit Short to Battery or Open (P011515)
    DESCRIPTION Refer to DTC P011511. Click here HINT: When DTC P011515 is stored, the ECM enters fail-safe mode. During fail-safe mode, the engine coolant temperature is estimated to be 80°C (176°F) by the ECM. Fail-safe mode continues until a pass condition is detected. DTC No. Detection Item DTC De ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0109