DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) sends signals to the driving support ECU assembly according to the brake control status. If the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU (brake booster with master cylinder assembly), it will store DTC C1A64.
CAUTION / NOTICE / HINT NOTICE: The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting. Click here PROCEDURE
HINT: If DTC C1A64 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Brake Actuator(for Hv Model): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during brake actuator assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Ins ...