OPERATION CHECK CHECK PRE-COLLISION SYSTEM SETTING (a) Turn the power switch on (IG). (b) Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on. HINT: When the power switch is turned on (IG), the PCS will turn on. This can be changed through a customize setting using the Techstream. (c) Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.
CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING (a) Turn the power switch on (IG). (b) Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly. HINT:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Motor Generator Control System: Generator Position Sensor Circuit "A" Circuit Voltage Below Threshold (P0C6416,P0C6417,P0C6916,P0C6917)
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate an abnormal resolver output signal. The cause of this malfunction may be one of the following: Internal inverter malfunction Inverter with converter assembly internal circuit malfunction Inverter low-voltage circuit malfunction The connectors a ...