INSTALLATION CAUTION / NOTICE / HINT PROCEDURE 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side) (a) Install the front seat belt anchor plate as shown in the illustration. 
(b) Install the front seat inner belt assembly LH with the nut. 
Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the separate type front seat cushion spring assembly. (c) Engage each clamp. (d) Connect each connector. 2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side) (a) Install the front seat belt anchor plate as shown in the illustration. 
(b) Install the front seat inner belt assembly RH with the nut. 
Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly. (c) Engage each clamp. (d) Connect each connector. 3. INSTALL FRONT SEAT ASSEMBLY Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Telematics System(for Gasoline Model): Remote Service Malfunction
PROCEDURE 1. CHECK CAN COMMUNICATION SYSTEM (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Bus Check. Click here (e) Check that all ECUs and sensors that use CAN communication are connected. Result Proceed to The ...
