ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the front seat outer belt assembly. PROCEDURE 1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here for Gasoline Model: Click here (b) Visually check for defects with the front seat outer belt assembly installed to the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the front seat outer belt assembly with a new one. 2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here for Gasoline Model: Click here (b) Visually check for defects with the front seat outer belt assembly removed from the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the front seat outer belt assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Brake Master Cylinder(for Gasoline Model): Inspection
INSPECTION PROCEDURE 1. INSPECT AND ADJUST BRAKE BOOSTER PUSH ROD NOTICE: Make the adjustment with no vacuum in the brake booster assembly. (Depress the brake pedal several times with the engine stopped.) HINT: Adjustment of the brake booster push rod is required when the brake master cylinder sub-a ...