ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the rear seat 3 point type belt assembly. PROCEDURE 1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here for Gasoline Model: Click here (b) Visually check for defects with the rear seat 3 point type belt assembly installed to the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the rear seat 3 point type belt assembly with a new one. 2. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Vehicle Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here for Gasoline Model: Click here (b) Visually check for defects with the rear seat 3 point type belt assembly removed from the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the rear seat 3 point type belt assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Luggage Compartment Door Lock: Installation
INSTALLATION PROCEDURE 1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (a) Install the luggage door lock control cable sub-assembly. 2. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (a) Connect the cable. (b) Engage the 2 claws to install the luggage compartment door inside handle. (c) Enga ...