DESCRIPTION When the M1 or M2 switch of the seat memory switch is pressed, the outer mirror control ECU assembly sends a switch signal to the main body ECU (multiplex network body ECU) via CAN communication. Then, the main body ECU (multiplex network body ECU) sends a recall request signal to the position control ECU assembly. The position control ECU assembly operates each motor to move the seat to the memorized position. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Check that each function of the power seat operates normally by using the front power seat switch LH. Click here OK: Each function of the power seat operates normally using the front power seat switch LH.
(a) Check the seat position memory function. Click here OK: Seat position memory function is normal.
(a) Under each of the following conditions, check that the seat position restoring function operates by pressing the M1 or M2 switch. Click here
(a) Store a seat position in memory for the M1 and M2 switches. Click here (b) Connect the Techstream to the DLC3. (c) Turn the power switch on (IG). (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Driver Seat / Data List. (f) Read the Data List according to the display on the Techstream. Body Electrical > Driver Seat > Data List
OK: Mem is displayed on the Techstream screen.
(a) Replace the outer mirror control ECU assembly LH with a new or known good one. Click here
(a) Check the seat position memory and restoring functions. Click here OK: Seat position memory and restoring functions operate normally.
(a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Hybrid Control / Data List. (e) Read the Data List according to the display on the Techstream. Powertrain > Hybrid Control > Data List
OK: On the Techstream screen, ON or OFF is displayed accordingly.
(a) Replace the position control ECU assembly with a new or known good one. Click here
(a) Check the seat position memory and restoring functions. Click here OK: Seat position memory and restoring functions operate normally.
(a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Data List. (e) Read the Data List according to the display on the Techstream. Body Electrical > Main Body > Data List
OK: On the Techstream screen, ON or OFF is displayed accordingly.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lane Departure Alert System (w/ Steering Control)(for Hv Model): Front Radar Sensor (C1A10)
DESCRIPTION The forward recognition camera uses the millimeter wave radar sensor assembly to detect obstacles in front of the vehicle. When the forward recognition camera receives information that there is an internal malfunction in the millimeter wave radar sensor assembly, DTC C1A10 is stored. DTC ...