INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the seat frame may injure your hands. PROCEDURE 1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY (a) Install the rear seat cushion heater assembly to the bench type rear seat cushion cover with 19 new tag pins. 2. INSTALL BENCH TYPE REAR SEAT CUSHION COVER Click here 3. INSTALL CHILD RESTRAINT SEAT BASE COVER Click here 4. INSTALL CHILD RESTRAINT SEAT COVER Click here 5. INSTALL REAR SEAT CUSHION LOCK HOOK Click here 6. INSTALL REAR SEAT CUSHION ASSEMBLY Click here 7. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here 8. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD Click here 9. INSTALL SPARE WHEEL COVER ASSEMBLY Click here 10. CHECK SEAT HEATER for HV Model: Click here for Gasoline Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Pre-collision System(for Hv Model): Lost Communication with Gateway Module (U1002)
DESCRIPTION This DTC is stored when the driving support ECU assembly cannot receive signals from the forward recognition camera or millimeter wave radar sensor assembly. DTC No. Detection Item DTC Detection Condition Trouble Area U1002 Lost Communication with Gateway Module After the power switch is ...