INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the seat frame may injure your hands. PROCEDURE 1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (a) Install the rear seatback lock assembly LH with the 2 nuts. Torque: 18 N·m {184 kgf·cm, 13 ft·lbf} (b) Engage the guide to connect the rear seatback lock assembly LH as shown in the illustration.
2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH HINT: Use the same procedure as for the LH side. 3. INSTALL ROOM PARTITION BOARD RH (a) Engage the 5 clips. (b) Install the room partition board RH with the 2 clips. 4. INSTALL ROOM PARTITION BOARD LH (a) Engage the 4 clips and 2 claws. (b) Install the room partition board LH with the clip. 5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY Click here 6. INSTALL REAR SEAT SHOULDER BELT COVER Click here 7. INSTALL ROOF SIDE INNER GARNISH LH Click here 8. INSTALL ROOF SIDE INNER GARNISH RH HINT: Use the same procedure as for the LH side. 9. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH Click here 10. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH HINT: Use the same procedure as for the LH side. 11. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH Click here 12. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH Click here 13. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Click here 14. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH HINT: Use the same procedure as for the LH side. 15. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (w/o Seat Heater System) (a) Install the luggage compartment inner trim pad. 16. INSTALL CENTER STOP LIGHT SET Click here 17. INSTALL REAR SEAT ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Door Lock Control System(for Gasoline Model): Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly. Click here (b) Measure the resistance according to the value(s) in the table bel ...