DCM OPERATION HISTORY DCM OPERATION HISTORY This function shows the telematics network status when the DCM (Telematics Transceiver) was operated. Use this when no DTC is present but this telematics system was unable to connect to the call center. This symptom may occur if cell phone signal strength is very weak. (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Choose "Telematics" from the System Selection Menu, and then click "Utility". (e) Click "DCM Operation History" on the Utility Selection Menu. Body Electrical > Telematics > Utility
(f) Follow the instructions on the Techstream.
HINT:
NOTICE: *1: A failure can also be caused by manually ending an SOS call, and does not necessarily indicate a device malfunction. HINT: *2: When communication to the call center fails, "Fail" is displayed. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Entry Function, Gasoline Model): Entry Interior Alarm does not Sound
DESCRIPTION The smart key system (for Entry Function) uses the buzzer in the combination meter assembly (meter ECU) to perform various vehicle interior warnings. When the conditions of each warning are met, the certification ECU (smart key ECU assembly) sends a buzzer activation request signal to th ...