DESCRIPTION If the red and green indicators fail to illuminate after the power switch is turned on (IG), the vehicle does not recognize the DCM (Telematics Transceiver). The DCM (Telematics Transceiver) connectors may have been disconnected or the DCM (Telematics Transceiver) is malfunctioning. PROCEDURE
(a) Turn the power switch off. (b) Connect the Techstream to the DLC3. (c) Turn the power switch on (IG) and wait for 10 seconds. (d) Turn the Techstream on. (e) Perform "Health Check" using the Techstream and check that Telematics (Safety Connect) is listed on "Health Check Result". Click here
(a) Turn the power switch off. (b) Connect the Techstream to the DLC3. (c) Turn the power switch on (IG) and wait for 10 seconds. (d) Turn the Techstream on. (e) Check current DTCs and history DTCs. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Safety Connect System(for Hv Model): Dcm Activation
DCM ACTIVATION DCM ACTIVATION This function should be used to activate the DCM (Telematics Transceiver) after a new DCM (Telematics Transceiver) has been installed. During the DCM Activation process, the Techstream automatically provides the telematics service provider with the new DCM (Telematics T ...