REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front seat airbag assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
NOTICE: If a front seat airbag assembly has been deployed, replace the front seat airbag assembly, front seatback frame sub-assembly, separate type front seatback pad and separate type front seatback cover with the necessary parts in accordance with the extent of the collision damage. Click here HINT:
PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY Click here 2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER Click here 3. REMOVE FRONT SEAT FRONT CUSHION SHIELD Click here 4. REMOVE FRONT SEAT CUSHION SHIELD Click here 5. REMOVE FRONT SEAT INNER CUSHION SHIELD Click here 6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY Click here 7. REMOVE FRONT SEAT HEADREST SUPPORT Click here 8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD Click here 9. REMOVE FRONT SEAT AIRBAG ASSEMBLY CAUTION: When storing the front seat airbag assembly, keep the airbag deployment side facing upward.
(b) Remove the 2 nuts and front seat airbag assembly. NOTICE:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Unable to Unlock Steering Wheel (Hybrid Control System cannot Start)
DESCRIPTION The steering lock actuator or upper bracket assembly activates the steering lock motor and moves the lock bar into the steering column to lock the steering. The steering may not unlock when the lock bar gets stuck in the lock hole of the steering column. In this case, if the power switch ...