ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the lower No. 2 instrument panel airbag assembly. PROCEDURE 1. INSPECT LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here (b) Visually check for defects with the lower No. 2 instrument panel airbag assembly installed to the vehicle. HINT: The defects are as follows:
OK: No defects are found. If any defects are found, replace the lower No. 2 instrument panel airbag assembly with a new one. 2. INSPECT LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here (b) Visually check for defects with the lower No. 2 instrument panel airbag assembly removed from the vehicle. HINT: The defects are as follows:
OK: No defects are found. If any defects are found, replace the lower No. 2 instrument panel airbag assembly, No. 2 instrument panel brace sub-assembly, instrument panel reinforcement or lower instrument panel sub-assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Mass Air Flow Meter: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during mass air flow meter sub-assembly removal/installation are shown below. Necessary Procedures After Parts ...