INSTALLATION PROCEDURE 1. INSTALL OCCUPANT DETECTION ECU
(b) Connect the 2 connectors. NOTICE: When installing the occupant detection ECU, be careful that the SRS wiring does not interfere with or is not pinched between other parts. 2. INSTALL FRONT SEAT ASSEMBLY RH HINT: Use the same procedure as for the LH side. Click here 3. PERFORM DIAGNOSTIC SYSTEM CHECK for Gasoline Model: Click here for HV Model: Click here 4. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK for Gasoline Model: Click here for HV Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Engine Coolant Temperature Sensor: Inspection
INSPECTION PROCEDURE 1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR CAUTION: Do not put your hands into the water that has been heated for the inspection. Touching the heated water could result in burns. (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Test ...