INSTALLATION PROCEDURE 1. INSTALL SEAT POSITION AIRBAG SENSOR (a) Engage the pin to install the seat position airbag sensor to the seat slide position sensor protector as shown in the illustration.
(c) Using a T30 "TORX" socket wrench, tighten the "TORX" bolt. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} (d) Make sure that the clearance between the seat position airbag sensor and seat rail is 1.3 mm (0.0512 in.). (e) Connect the connector and engage the clamp. (f) Check that there is no looseness in the installed parts of the seat position airbag sensor. 2. INSTALL POSITION CONTROL ECU ASSEMBLY (w/ Seat Position Memory System) Click here 3. INSTALL FRONT SEAT ASSEMBLY LH Click here 4. PERFORM DIAGNOSTIC SYSTEM CHECK for Gasoline Model: Click here for HV Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Audio And Visual System(for Hv Model): Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter
DESCRIPTION The stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - STEREO JACK ADAPTER ASSEMBLY) (a) Disconnect the G3 ...