ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the side No. 1 airbag sensors. PROCEDURE 1. INSPECT SIDE NO. 1 AIRBAG SENSOR (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here 2. INSPECT SIDE NO. 1 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here (b) Visually check the side No. 1 airbag sensors for defects if a center pillar of the vehicle or the area around a center pillar is damaged. HINT: The defects are as follows:
OK: No defects are found. If any defects are found, replace the side No. 1 airbag sensor with a new one. 3. INSPECT SIDE NO. 1 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed) (a) When airbags have deployed as the result of a collision, be sure to replace all side No. 1 airbag sensors in the damaged areas (anywhere in need of repair). (b) Visually check the side No. 1 airbag sensors in undamaged areas for defects. HINT: The defects are as follows:
OK: No defects are found. If any defects are found or a side No. 1 airbag sensor has detected a major collision, replace the side No. 1 airbag sensor with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Throttle Body: Components
COMPONENTS ILLUSTRATION *1 AIR CLEANER CAP WITH AIR CLEANER HOSE *2 THROTTLE BODY GASKET *3 THROTTLE BODY WITH MOTOR ASSEMBLY *4 VACUUM HOSE *5 NO. 1 FUEL VAPOR FEED HOSE *6 NO. 2 VENTILATION HOSE *7 NO. 2 WATER BY-PASS HOSE *8 NO. 3 WATER BY-PASS HOSE N*m (kgf*cm, ft.*lbf): Specified torque ● Non ...