ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the side airbag pressure sensors. PROCEDURE 1. INSPECT SIDE AIRBAG PRESSURE SENSOR (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here 2. INSPECT SIDE AIRBAG PRESSURE SENSOR (for Vehicle Involved in Collision and Airbag not Deployed) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here (b) Visually check the side airbag pressure sensors for defects if a front door of the vehicle or the area around a front door is damaged. HINT: The defects are as follows:
OK: No defects are found. If any defects are found, replace the side airbag pressure sensor with a new one. 3. INSPECT SIDE AIRBAG PRESSURE SENSOR (for Vehicle Involved in Collision and Airbag is Deployed) (a) When airbags have deployed as the result of a collision, be sure to replace all side airbag pressure sensors in the damaged areas (anywhere in need of repair). (b) Visually check the side airbag pressure sensors in undamaged areas for defects. HINT: The defects are as follows:
OK: No defects are found. If any defects are found or a side airbag pressure sensor has detected a major collision, replace the side airbag pressure sensor with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Antenna Coil Open / Short (B2784)
DESCRIPTION When an open or short circuit is detected in the transponder key amplifier coil built into the power switch, the certification ECU (smart key ECU assembly) stores this DTC. This DTC is also stored as a history DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2784 An ...