Components COMPONENTS ILLUSTRATION
Installation INSTALLATION PROCEDURE 1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (a) Engage the clamp to install the No. 1 indoor electrical key antenna assembly. NOTICE: Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one. (b) Connect the connector. (c) Connect the front floor carpet assembly. 2. INSTALL CONSOLE ASSEMBLY Click here Removal REMOVAL PROCEDURE 1. REMOVE CONSOLE ASSEMBLY Click here 2. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (a) Disconnect the front floor carpet assembly.
(c) Disengage the clamp to remove the No. 1 indoor electrical key antenna assembly. NOTICE: Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Audio And Visual System(for Gasoline Model): Noise Occurs
PROCEDURE 1. CHECK NOISE CONDITION (a) Check from which direction the noise comes (front left or right, or rear left or right). OK: The location of the noise source can be determined. NG GO TO STEP 3 OK 2. CHECK SPEAKERS (a) Check the installation condition of the speaker units that are located near ...