Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT SECURITY HORN ASSEMBLY
Installation INSTALLATION PROCEDURE 1. INSTALL SECURITY HORN ASSEMBLY (a) Engage the 2 guides and install the security horn assembly with the bolt. Torque: 8.3 N·m {85 kgf·cm, 73 in·lbf} (b) Connect the connector. (c) Engage the clamp. 2. INSTALL INVERTER RESERVE TANK SUB-ASSEMBLY (for HV Model) (a) Engage the pin as shown in the illustration.
(b) Install the inverter reserve tank assembly with the bolt. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} Removal REMOVAL PROCEDURE 1. SEPARATE INVERTER RESERVE TANK SUB-ASSEMBLY (for HV Model)
(b) Disengage the pin to separate the inverter reserve tank assembly from the engine mounting insulator sub-assembly RH as shown in the illustration.
NOTICE:
2. REMOVE SECURITY HORN ASSEMBLY
(b) Disconnect the connector.
(d) Disengage the 2 guides to remove the security horn assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Shift Paddle Switch: Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 1 SWITCH WIRE HINT: Perform this procedure only when replacement of the No. 1 switch wire is necessary. (a) Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly. 2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) ( ...