Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Terminals Of Ecu

TERMINALS OF ECU

DCM (TELEMATICS TRANSCEIVER)

*a

to Telephone Antenna (Sub)

*b

to Telephone Antenna (Main)

*c

to GPS Antenna

-

-

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

G11-1 (USB-)

GR

USB communication line

-

-

G11-2 (USB+)

GR

USB communication line

-

-

G11-6 (USBS) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 Ω

G11-3 (USBG) - Body ground

GR - Body ground

DCM (Telematics Transceiver) power supply ground signal

Always

Below 1 Ω

G11-4 (VOT+) - G9-4 (E)

R - BR

Sent voice signal

Calling while using the operator service

A waveform synchronized with the voice signals received voice is output

G11-5 (USBV) - G9-4 (E)

L - BR

DCM (Telematics Transceiver) power supply signal

Always

Below 1 V

Engine switch on (IG)

4.5 to 5.25 V

G11-7 (VOT-) - G9-4 (E)

G - BR

Sent voice signal

Calling while using the operator service

A waveform synchronized with the received voice is output

G11-8 (VOR-) - G9-4 (E)

W - BR

Receive voice signal

Receiving a call while using the operator service

A waveform synchronized with the sent voice is output

G11-9 (VOR+) - G9-4 (E)

B - BR

Receive voice signal

Receiving a call while using the operator service

A waveform synchronized with the sent voice is output

RADIO AND DISPLAY RECEIVER ASSEMBLY

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

G108-2 (USB-)*

BR

USB communication line

-

-

G108-1 (USB+)*

V

USB communication line

-

-

G108-3 (USBS) - Body ground*

Shielded - Body ground

Shield ground

Always

Below 1 V

G1-15 (VOT+) - G3-1 (GND1)

B - BR

Sent voice signal

Destination assist service in use and vehicle occupant speaking to operator

A waveform synchronized with the sent voice is output

G1-10 (USBV) - G3-1 (GND1)

L - BR

DCM (Telematics transceiver) power supply

Power switch on (ACC)

4.75 to 5.25 V

Power switch off

A waveform synchronized with sound is output

G1-16 (VOT-) - G3-1 (GND1)

W - BR

Sent voice signal

Destination assist service in use and vehicle occupant speaking to operator

A waveform synchronized with the sent voice is output

G1-14 (VOR-) - G3-1 (GND1)

G - BR

Receive voice signal

Destination assist service in use and operator speaking to vehicle occupant

A waveform synchronized with the received voice is output

G1-13 (VOR+) - G3-1 (GND1)

R - BR

Receive voice signal

Destination assist service in use and operator speaking to vehicle occupant

A waveform synchronized with the received voice is output

  • *: w/o Navigation System

NAVIGATION ECU (w/ Navigation System)

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

G113-2 (USB-)

BR

USB communication line

-

-

G113-1 (USB+)

V

USB communication line

-

-

G113-3 (USBS) - Body ground

Shielded - Body ground

Shield ground

Always

Below 1 V

    System Diagram

    Toyota Entune System(for Hv Model)

    See More:

    Toyota Avalon (XX50) 2019-2022 Owners Manual > For safe use: For safe driving
    For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seatback so that you are sitting straight up and so that you do not have to lean forward to steer. Adjust the seat so that you can depress the pedals fully and so ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0209