INSTALLATION PROCEDURE 1. INSTALL NO. 5 ANTENNA CORD SUB-ASSEMBLY (w/ Navigation System) (a) Connect the connector to install the No. 5 antenna cord sub-assembly. (b) Engage the clamp. 2. INSTALL NAVIGATION ECU WITH BRACKET (w/ Navigation System) Click here 3. INSTALL NO. 5 ANTENNA CORD SUB-ASSEMBLY (w/o Navigation System) (a) Connect the connector to install the No. 5 antenna cord sub-assembly. 4. INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY Click here 5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Click here 6. INSTALL CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL Click here 7. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL Click here 8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Click here 9. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY Click here 10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Click here 11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH Click here 12. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Click here |
Toyota Avalon Service & Repair Manual > Climate Control Seat System(for Hv Model): Terminals Of Ecu
TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (a) Disconnect the G35 air conditioning amplifier assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. Ter ...