REMOVAL PROCEDURE 1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Click here 2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Click here 3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Click here 4. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY Click here 5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Click here 6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL Click here 7. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL Click here 8. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Click here 9. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY Click here 10. REMOVE NO. 5 ANTENNA CORD SUB-ASSEMBLY (w/o Navigation System)
11. REMOVE NAVIGATION ECU WITH BRACKET (w/ Navigation System) Click here
12. REMOVE NO. 5 ANTENNA CORD SUB-ASSEMBLY (w/ Navigation System) (a) w/o Manual (SOS) Switch:
(2) Disconnect the connector to remove the No. 5 antenna cord sub-assembly. (b) w/ Manual (SOS) Switch:
(2) Disconnect the connector to remove the No. 5 antenna cord sub-assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Airbag System(for Gasoline Model): Lost Communication with Restraints Occupant Classification System Module (U0154)
DESCRIPTION The airbag ECU assembly sends/receives signals to/from each ECU via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode U0154 Lost Communication with Restraints Occupant Classification System Module CAN communication erro ...
