REMOVAL PROCEDURE 1. PRECAUTION NOTICE:
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Click here 3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Click here 4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Click here 5. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY Click here 6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Click here 7. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL Click here 8. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL Click here 9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Click here 10. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY Click here 11. REMOVE NAVIGATION ECU WITH BRACKET (a) w/o Manual (SOS) Switch:
(2) Remove the 2 nuts and pull the navigation ECU with bracket as shown in the illustration.
(3) Disconnect each connector and remove the navigation ECU with bracket. (b) w/ Manual (SOS) Switch:
(2) Remove the 2 nuts and pull the navigation ECU with bracket as shown in the illustration.
(3) Disconnect each connector and remove the navigation ECU with bracket. 12. REMOVE NO. 5 ANTENNA CORD SUB-ASSEMBLY Click here 13. REMOVE NO. 2 TELEPHONE BRACKET (a) w/o Manual (SOS) Switch:
(b) w/ Manual (SOS) Switch:
14. REMOVE NO. 1 TELEPHONE BRACKET (a) w/o Manual (SOS) Switch:
(b) w/ Manual (SOS) Switch:
15. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH ANTENNA CORD (w/ Manual (SOS) Switch) 16. REMOVE NAVIGATION ECU |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Customer Problem Analysis Check
CUSTOMER PROBLEM ANALYSIS CHECK HINT: Be sure to ask the customer in detail about the following points concerning the vehicle operating conditions, environment and problem, and then check for DTCs. If the entry unlock function does not operate. If the power source mode does not change even though th ...