DESCRIPTION This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the radio and display receiver assembly dropping temporarily.
WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(b) Measure the battery voltage. Standard Voltage: 11 to 14 V HINT: This display is updated once per second.
(a) Clear the DTCs. Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output. Body Electrical > Navigation System > Trouble CodesOK: No DTCs are output.
(a) Disconnect the G3 radio and display receiver assembly connector. (b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Park / Neutral Position Switch: Adjustment
ADJUSTMENT CAUTION / NOTICE / HINT NOTICE: Before adjusting the park/neutral position switch assembly, check that the shift lever is in N. PROCEDURE 1. SECURE VEHICLE (a) Fully apply the parking brake and chock a wheel. CAUTION: Make sure to apply the parking brake and chock a wheel before performin ...