Toyota Avalon Service & Repair Manual: Extension Module Malfunction 2 (B1556)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the Navigation ECU.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B1556

Extension Module Malfunction 2

When any of the following conditions is met:

  • Internal power supply malfunction
  • Internal hard drive malfunction
  • EEPROM error
  • Storage malfunction

Navigation ECU

CAUTION / NOTICE / HINT

NOTICE:

When replacing the navigation ECU, always replace it with a new one. If a navigation ECU which was installed to another vehicle is used, the following may occur:

  • A communication malfunction DTC may be stored.
  • The navigation ECU may not operate normally.

PROCEDURE

1.

CHECK DTC

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE NAVIGATION ECU

    HD Radio Tuner Malfunction (B1551,B158D,B15A0,B15B0,B15B3,B15B7,B15BA,B15F9)

    Voice Recognition Microphone Disconnected (B1579)

    See More:

    Toyota Avalon Service & Repair Manual > Shift Lever: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL LOWER POSITION INDICATOR HOUSING (a) Engage the 4 claws and 2 guides to install the lower position indicator housing to the shift lock control unit assembly. NOTICE: Do not damage the lower position indicator housing. 2. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY (a) I ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0155