Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Parking Brake Switch Circuit

DESCRIPTION

This circuit is from the skid control ECU (brake actuator assembly) to the radio and display receiver assembly.

WIRING DIAGRAM

PROCEDURE

1.	CHECK BRAKE WARNING LIGHT

(a) Check that the brake warning light comes on when the parking brake is applied and goes off when it is released.

OK:

The brake warning light operates as specified above.

GO TO BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS

2.	CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) - RADIO AND DISPLAY RECEIVER ASSEMBLY)

(a) Disconnect the G2 radio and display receiver assembly connector.

(b) Disconnect the A28 skid control ECU (brake actuator assembly) connector.

Standard Resistance:

Tester Connection	Condition	Specified Condition
G2-20 (PKB) - A28-33 (PKB)	Always	Below 1 Ω
G2-20 (PKB) or A28-33 (PKB) - Body ground	Always	10 kΩ or higher

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

REPAIR OR REPLACE HARNESS OR CONNECTOR

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Power Seat Control System(for Hv Model With Memory): System Description
SYSTEM DESCRIPTION FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION The driver seat is equipped with slide, reclining, lifter, front vertical and lumbar support adjustment functions. The memory call function uses the key ID code of each electrical key transmitter sub-assembly to memorize and recall the a ...

Toyota Avalon (XX50) 2019-2022 Owners Manual