Toyota Avalon Service & Repair Manual: Voice Guidance does not Function

WIRING DIAGRAM

PROCEDURE

1.

CHECK VOICE GUIDANCE SETTING

(a) Check that the voice guidance setting is not off.

OK:

Voice guidance setting is not off.

NG

CHANGE VOICE GUIDANCE SETTING TO ON

OK

2.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NAVIGATION ECU)

(a) Disconnect the G1 radio and display receiver assembly connector.

(b) Disconnect the G13 navigation ECU connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G1-22 (SI+) - G13-6 (VOI+)

Always

Below 1 Ω

G1-23 (SI-) - G13-7 (VOI-)

Always

Below 1 Ω

G1-22 (SI+) or G13-6 (VOI+) - Body ground

Always

10 kΩ or higher

G1-23 (SI-) or G13-7 (VOI-) - Body ground

Always

10 kΩ or higher

G13-8 (SLD1) - Body ground

Always

10 kΩ or higher

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

    Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier

    Voice is not Recognized

    See More:

    Toyota Avalon Service & Repair Manual > Tire Pressure Warning System(for Hv Model): Auto ID Under Registration (C2128)
    DESCRIPTION When ID registration is being performed via the automatic ID registration function, the tire pressure warning ECU and receiver stores C2128 and the tire pressure warning light flashes for 1 minute and then illuminates. When the tire pressure warning ECU receives data from all registered ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0137