CUSTOMIZE PARAMETERS CUSTOMIZE BLIND SPOT MONITOR SYSTEM (a) Customizing with the Techstream NOTICE:
(1) Connect the Techstream to the DLC3. (2) Turn the engine switch to ON. (3) Turn the blind spot monitor system on. (4) Turn the Techstream on. (5) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / Warning. (6) Select the setting by referring to the table below. Warning
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Exhaust Pipe: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front exhaust pipe assembly (TWC: Rear Catalyst), center exhaust pipe assembly and tail exhaust pipe ass ...