DESCRIPTION This DTC is stored when the clearance warning ECU assembly receives a signal from the blind spot monitor system via CAN communication indicating that the beam axis inspection is incomplete.
PROCEDURE
(a) Using the Techstream, check for DTCs according to the prompts on the screen. HINT: After turning the engine switch from off to on (IG), wait 4 seconds or more before checking for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes(b) Clear the DTCs according to the screen on the Techstream. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs(c) Recheck for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble CodesHINT:
|
Toyota Avalon Owners Manual > Steps to take in an
emergency: If you think something
is wrong
If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms Fluid leaks under the vehicle. (Water dripping from the air conditioning after use is normal.) Flat-looking tires or uneven tire wear Engin ...