DESCRIPTION The front corner ultrasonic sensor LH is installed to the front bumper. The clearance warning ECU assembly detects obstacles based on signals received from the front corner ultrasonic sensor LH. If the front corner ultrasonic sensor LH has an open circuit or other malfunction, it will not function normally.
CAUTION / NOTICE / HINT NOTICE: If DTCs are output after repairs, turn the engine switch on (IG) and the intuitive parking assist system on. Then clear the DTCs. Click here PROCEDURE
(a) Check for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
(a) Replace the front corner ultrasonic sensor LH with a known good one. Click here HINT: All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
(a) Clear the DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs(b) Check for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: Hybrid/EV Battery "A" Voltage Sensor/Boosting Converter Voltage Sensor "A" Signal Compare Failure (P1C2D62)
DTC SUMMARY MALFUNCTION DESCRIPTION The hybrid vehicle control ECU detects a VB sensor or VL sensor malfunction. The cause of this malfunction may be one of the following: Inverter voltage (VB or VL) sensor internal circuit malfunction Voltage sensor malfunction Motor generator control ECU (MG ECU) ...