DESCRIPTION The front center ultrasonic sensor RH is installed to the front bumper. The clearance warning ECU assembly detects obstacles based on signals received from the front center ultrasonic sensor RH. If the front center ultrasonic sensor RH has an open circuit or other malfunction, it will not function normally.
CAUTION / NOTICE / HINT NOTICE: If DTCs are output after repairs, turn the engine switch on (IG) and the intuitive parking assist system on. Then clear the DTCs. Click here PROCEDURE
(a) Check for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
(a) Replace the front center ultrasonic sensor RH with a known good one. Click here HINT: All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
(a) Clear the DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs(b) Check for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
|
Toyota Avalon Service & Repair Manual > Active Control Engine Mount(for Front Side): Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT ENGINE MOUNTING INSULATOR (a) Install the stay to the front engine mounting insulator with the nut. Torque: 6.0 N·m {61 kgf·cm, 53 in·lbf} (b) Install the front engine mounting insulator to the front frame assembly with the 3 nuts. Torque: 72 N·m {734 kgf ...