DESCRIPTION The rear center ultrasonic sensor RH is installed to the rear bumper. The clearance warning ECU assembly detects obstacles based on signals received from the rear center ultrasonic sensor RH. If the rear center ultrasonic sensor RH has an open circuit or other malfunction, it will not function normally.
CAUTION / NOTICE / HINT NOTICE: If DTCs are output after repairs, turn the engine switch on (IG) and the intuitive parking assist system on. Then clear the DTCs. Click here
PROCEDURE
(a) Check for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
(a) Replace the rear center ultrasonic sensor RH with a known good one. Click here HINT: All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
(a) Clear the DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs(b) Check for DTCs. Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting System(for Gasoline Model With Cornering Light): Steering Position Sensor (B2414)
DESCRIPTION The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from B2414 Steering Position Sensor The engine switch is on (IG). Sensor mal ...
