Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Control Module Communication Bus "A" Off (U0073,U0155)

DESCRIPTION

These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication line.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U0073

Control Module Communication Bus "A" Off

Control module communication bus off

CAN communication system

U0155

Lost Communication with Instrument Panel Cluster (IPC) Control Module

Lost communication with the combination meter assembly

CAN communication system

HINT:

When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.

PROCEDURE

1.

CHECK DTC OUTPUT

(a) Clear the DTCs

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs

(b) Check for CAN communication system DTCs

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes

Result

Proceed to

CAN communication system DTCs are output

A

No CAN communication system DTCs are output

B

A

GO TO CAN COMMUNICATION SYSTEM

B

USE SIMULATION METHOD TO CHECK

    Terminals Of Ecu

    CAN Communication Failure (Message Registry) (U1000)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Safety Connect System(for Gasoline Model): Green And Red Indicators Do Not Come On When Ig-on
    DESCRIPTION If the red and green indicators fail to illuminate after the engine switch is turned on (IG), the vehicle does not recognize the DCM (Telematics Transceiver). The DCM (Telematics Transceiver) connectors may have been disconnected or the DCM (Telematics Transceiver) is malfunctioning. PRO ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0189