Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Back Camera Internal Circuit (C2A63)

DESCRIPTION

This DTC is stored when the parking assist ECU detects a signal indicating a malfunction in the television camera assembly via CAN communication.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

C2A63

Back Camera Internal Circuit

A signal indicating a malfunction in the television camera assembly is detected.

Television camera assembly

Parking assist ECU

CAUTION / NOTICE / HINT

NOTICE:

  • When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs.

Chassis > Panoramic View Monitor > Clear DTCs

(b) Check for DTCs.

Chassis > Panoramic View Monitor > Trouble Codes

OK:

DTC C2A63 is not output.

OK

END

NG

REPLACE TELEVISION CAMERA ASSEMBLY

    Back Camera Response Malfunction (C2A6A)

    Wheel Speed Sensor Malfunction (C164D)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Side Turn Signal Light Assembly: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side turn signal light assembly removal/installation are shown below. Necessary Procedure After Parts R ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0163