Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL PARKING ASSIST ECU

(a) Turn back the front floor carpet assembly and front floor mat as shown in the illustration.

(b) Engage the 2 guides to temporarily install the parking assist ECU as shown in the illustration.

Install in this Direction (1)

Install in this Direction (2)

(c) Install the parking assist ECU with the bolt.

(d) Install the front floor carpet assembly and front floor mat to its original position as shown in the illustration.

(e) Engage the clamp.

(f) Connect each connector.

2. INSTALL PARKING ASSIST ECU COVER

(a) Install the parking assist ECU cover with the 3 clips.

3. INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click here

4. PERFORM CALIBRATION

for Gasoline Model: Click here

for HV Model: Click here

    Components

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Fuel Rail Pressure Sensor "A" Circuit Short to Battery or Open (P019015)
    DESCRIPTION Refer to DTC P019011. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P019015 Fuel Rail Pressure Sensor "A" Circuit Short to Battery or Open The fuel pressure sensor (for high pressure side) output voltage is higher than 4.9 V for 3 seconds or more ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0154