INSTALLATION PROCEDURE 1. INSTALL FRONT CORNER ULTRASONIC SENSOR HINT:
(a) Engage the 2 claws to install the front corner ultrasonic sensor as shown in the illustration. 
(b) Connect the connector. 2. INSTALL FRONT CENTER ULTRASONIC SENSOR HINT:
(a) Engage the 2 claws to install the front center ultrasonic sensor as shown in the illustration. 
(b) Connect the connector. 3. INSTALL FRONT BUMPER ASSEMBLY Click here
4. PERFORM CALIBRATION for Gasoline Model: Click here
for HV Model: Click here
SST: 09989-00020 |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Can Communication System(for Hv Model): Open in One Side of Bus 5 Branch Line
DESCRIPTION When the CAN bus main lines are normal (no open, short to ground, short to +B or short between lines) and there is an ECU or sensor on the "Communication Bus Check" screen that is indicated as not communicating or whose connection status on the "Communication Bus Check" screen changes in ...
