Toyota Avalon Service & Repair Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE FRONT DISC BRAKE PISTON

(a) Place a piece of cloth between the front disc brake piston and front disc brake cylinder.

*a

Cloth

(b) Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

CAUTION:

  • Do not hold the front disc brake cylinder with any part of your hand between the front disc brake cylinder and front disc brake piston.
  • Do not place any part of your hand in front of the front disc brake piston when using compressed air as a severe injury may result.

NOTICE:

Do not allow any brake fluid to spatter.

2. REMOVE CYLINDER BOOT

(a) Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the front disc brake cylinder.

NOTICE:

Be careful not to damage the front disc brake cylinder.

*a

Protective Tape

3. REMOVE PISTON SEAL

(a) Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.

*a

Protective Tape

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

(a) Remove the front disc brake bleeder plug cap from the front disc brake bleeder plug.

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG

(a) Remove the front disc brake bleeder plug from the front disc brake cylinder.

    Components

    Inspection

    See More:

    Toyota Avalon Service & Repair Manual > Rear Seat Inner Belt Assembly(for Lh Side): Inspection
    INSPECTION PROCEDURE 1. INSPECT REAR SEAT INNER BELT ASSEMBLY LH (for Gasoline Model) (a) Inspect the rear seat inner with center belt assembly LH (for LH). (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 4 ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.02